Trench
Drain
TR1
Ideal for industrial, commercial,
or residential drainage. Comes completely assembled
in 3’ sections. Simply remove and end cap
extend the trench to any length, and reinstall
the end cap. The trench may be field cut with
handsaw, and capped with a male end cap. Three
bottom drains are molded in. Knockout membranes
allow trench to be drained with 2” or 3”
schedule 40 or SDR 35 pipe. The grate is held
in place with 10 Type A-SmS screws. There is no
need to remove the grate during installation.
Simply snap the trenches together for a free flowing
fit.
|